dmesg - Western Digital WD3200BEVT-2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: ASUSTeK Computer INC. Z84J/Z84J, BIOS 080012 12/11/2006
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000007ffb0000
0000000000 - 007fe00000 page 2M
007fe00000 - 007ffb0000 page 4k
kernel direct mapping tables up to 7ffb0000 @ 1fffc000-20000000
RAMDISK: 364e0000 - 37268000
ACPI: RSDP 00000000000fb730 00014 (v00 ACPIAM)
ACPI: RSDT 000000007ffb0000 00038 (v01 NEC 12000611 MSFT 00000097)
ACPI: FACP 000000007ffb0200 00084 (v02 A_M_I_ OEMFACP 12000611 MSFT 00000097)
ACPI Warning: Invalid length for PmTimerBlock: 24, using default 32 (20110623/tbfadt-610)
ACPI: DSDT 000000007ffb05b0 06445 (v01 A0460 A0460000 00000000 INTL 20060113)
ACPI: FACS 000000007ffbe000 00040
ACPI: APIC 000000007ffb0390 0005C (v01 A_M_I_ OEMAPIC 12000611 MSFT 00000097)
ACPI: MCFG 000000007ffb03f0 0003C (v01 A_M_I_ OEMMCFG 12000611 MSFT 00000097)
ACPI: SLIC 000000007ffb0430 00176 (v01 NEC 12000611 MSFT 00000097)
ACPI: OEMB 000000007ffbe040 00060 (v01 A_M_I_ AMI_OEM 12000611 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007ffb0000
Initmem setup node 0 0000000000000000-000000007ffb0000
NODE_DATA [000000007ffab000 - 000000007ffaffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffb0
On node 0 totalpages: 524095
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 8127 pages used for memmap
DMA32 zone: 511985 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83072 r8192 d23424 u1048576
pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515899
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2033704k/2096832k available (6566k kernel code, 452k absent, 62676k reserved, 6637k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:512 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2161.071 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.14 BogoMIPS (lpj=8644284)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 27049 entries in 107 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9a000
calibrate_delay_direct() dropping min bogoMips estimate 0 = 6790875
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (8644.99 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at 7ffbe000 (204800 bytes)
print_constraints: dummy:
RTC time: 21:14:49, date: 07/31/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007ffb6a00 00445 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00445 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI Warning: Incorrect checksum in table [SSDT] - 0xFD, should be 0xFC (20110623/tbutils-314)
ACPI: SSDT 000000007ffb6e50 00445 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00445 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
pci 0000:00:01.0: [8086:27a1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf5cf8000-0xf5cfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xa480-0xa49f]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xa800-0xa81f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xa880-0xa89f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io 0xac00-0xac1f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xf5cffc00-0xf5cfffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 4700 (mask 000b)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0300 (mask 0003)
pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:07:00.0: [10de:0398] type 0 class 0x000300
pci 0000:07:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
pci 0000:07:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:07:00.0: reg 1c: [mem 0xfa000000-0xfaffffff 64bit]
pci 0000:07:00.0: reg 24: [io 0xec00-0xec7f]
pci 0000:07:00.0: reg 30: [mem 0xf9fe0000-0xf9ffffff pref]
pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 07-07]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf9f00000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:06:00.0: [8086:4222] type 0 class 0x000280
pci 0000:06:00.0: reg 10: [mem 0xf9eff000-0xf9efffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [mem 0xf9e00000-0xf9efffff]
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf9dfffff]
pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff 64bit pref]
pci 0000:03:00.0: [197b:2360] type 0 class 0x000101
pci 0000:03:00.0: reg 10: [io 0xcc00-0xcc07]
pci 0000:03:00.0: reg 14: [io 0xc880-0xc883]
pci 0000:03:00.0: reg 18: [io 0xc800-0xc807]
pci 0000:03:00.0: reg 1c: [io 0xc480-0xc483]
pci 0000:03:00.0: reg 20: [io 0xc400-0xc40f]
pci 0000:03:00.0: reg 24: [mem 0xf5ffe000-0xf5ffffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf5f00000-0xf5ffffff]
pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [mem 0xf5efc000-0xf5efffff 64bit]
pci 0000:02:00.0: reg 18: [io 0xb800-0xb8ff]
pci 0000:02:00.0: reg 30: [mem 0xf5ec0000-0xf5edffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xf5e00000-0xf5efffff]
pci 0000:01:01.0: [1180:0832] type 0 class 0x000c00
pci 0000:01:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:01:01.0: MMC cards are now supported by standard SDHCI controller
pci 0000:01:01.0: reg 10: [mem 0xf5dfe800-0xf5dfefff]
pci 0000:01:01.0: PME# supported from D0 D3hot D3cold
pci 0000:01:01.0: PME# disabled
pci 0000:01:01.1: [1180:0822] type 0 class 0x000805
pci 0000:01:01.1: reg 10: [mem 0xf5dff400-0xf5dff4ff]
pci 0000:01:01.1: supports D1 D2
pci 0000:01:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:01.1: PME# disabled
pci 0000:01:01.2: [1180:0843] type 0 class 0x000880
pci 0000:01:01.2: reg 10: [mem 0xf5dff800-0xf5dff8ff]
pci 0000:01:01.2: supports D1 D2
pci 0000:01:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:01.2: PME# disabled
pci 0000:01:01.3: [1180:0592] type 0 class 0x000880
pci 0000:01:01.3: reg 10: [mem 0xf5dffc00-0xf5dffcff]
pci 0000:01:01.3: supports D1 D2
pci 0000:01:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:01.3: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf5d00000-0xf5dfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000007ffb0000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x80000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed13000-0xfed19fff]
system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0060]
pnp 00:04: [io 0x0064]
pnp 00:04: [irq 1]
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs SYN0a04 SYN0a00 SYN0002 PNP0f13 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x0300-0x0303]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs ITE8707 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x004d]
pnp 00:09: [io 0x0050-0x005e]
pnp 00:09: [io 0x0063]
pnp 00:09: [io 0x0065]
pnp 00:09: [io 0x0067-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x025c-0x025f]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: [io 0x0800-0x087f]
pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io 0x0480-0x04bf]
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfed20000-0xfed3ffff]
pnp 00:09: [mem 0xfed50000-0xfed8ffff]
pnp 00:09: [mem 0xffb00000-0xffbfffff]
pnp 00:09: [mem 0xfff00000-0xffffffff]
system 00:09: [io 0x025c-0x025f] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x0800-0x087f] has been reserved
system 00:09: [io 0x0480-0x04bf] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:09: [mem 0xfff00000-0xffffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xe0000000-0xe3ffffff]
system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000cffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0x7fffffff]
pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.3: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 07-07]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf9f00000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf9e00000-0xf9efffff]
pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf9dfffff]
pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf5f00000-0xf5ffffff]
pci 0000:00:1c.2: bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xf5e00000-0xf5efffff]
pci 0000:00:1c.3: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: bridge window [mem 0xf5d00000-0xf5dfffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xf9f00000-0xfbffffff]
pci_bus 0000:07: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xf9e00000-0xf9efffff]
pci_bus 0000:06: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf9dfffff]
pci_bus 0000:04: resource 2 [mem 0xcc000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xf5f00000-0xf5ffffff]
pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xf5e00000-0xf5efffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:01: resource 1 [mem 0xf5d00000-0xf5dfffff]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:07:00.0: Boot video device
PCI: CLS 32 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1375305288.252:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 3972
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 15
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (43 C)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ERST: Table is not found!
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Freeing initrd memory: 13856k freed
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi0 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf5ffe000 port 0xf5ffe100 irq 18
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata2: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata3: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf5cffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a480
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ac00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 5:732:248
rtc_cmos 00:03: setting system clock to 2013-07-31 21:14:49 UTC (1375305289)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata2.00: ATA-8: WDC WD3200BEVT-22A0RT0, 01.01A01, max UDMA/133
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
ata3.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, AS05, max UDMA/33
ata3.01: configured for UDMA/33
ata1: SATA link down (SStatus 0 SControl 300)
scsi 1:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L632D AS05 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:1:0: Attached scsi CD-ROM sr0
sr 2:0:1:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1608k freed
Freeing unused kernel memory: 1196k freed
udevd[90]: starting version 175
usb 1-8: new high-speed USB device number 3 using ehci_hcd
sky2: driver version 1.30
sky2 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
sky2 0000:02:00.0: irq 45 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:1b:fc:2d:9e:4c
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:01:01.1: SDHCI controller found [1180:0822] (rev 19)
sdhci-pci 0000:01:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
sdhci-pci 0000:01:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:01:01.1] using DMA
sdhci-pci 0000:01:01.2: SDHCI controller found [1180:0843] (rev 1)
sdhci-pci 0000:01:01.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
sdhci-pci 0000:01:01.2: setting latency timer to 64
mmc1: no vmmc regulator found
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:01:01.2] using DMA
firewire_ohci 0000:01:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
firewire_ohci: Added fw-ohci device 0000:01:01.0, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x11
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
firewire_core: created device fw0: GUID 00e01800038e39db, S400
usb 4-1: new full-speed USB device number 2 using uhci_hcd
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[307]: starting version 175
Adding 2095100k swap on /dev/sda5. Priority:-1 extents:1 across:2095100k
intel_rng: FWH not detected
lp: driver loaded but no devices found
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
leds_ss4200: no LED devices found
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver btusb
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2011 Intel Corporation
iwl3945 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
iwl3945 0000:06:00.0: setting latency timer to 64
r592 0000:01:01.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
r592 0000:01:01.3: setting latency timer to 64
asus_laptop: Asus Laptop Support version 0.42
asus_laptop: Error calling BSTS
asus_laptop: Z84J model detected
iwl3945 0000:06:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:06:00.0: irq 46 for MSI/MSI-X
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
r592: driver successfully loaded
ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
Registered led device: asus::mail
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC882: BIOS auto-probing.
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
nvidia 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:07:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:07:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.48 Sun Sep 9 20:22:27 PDT 2012
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005000000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
init: failsafe main process (652) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ppdev: user-space parallel port driver
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 0000:02:00.0: eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-stop pre-start process (1142) terminated with status 1
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
wlan0: authenticate with 20:4e:7f:30:f9:ae (try 1)
wlan0: authenticated
wlan0: associate with 20:4e:7f:30:f9:ae (try 1)
wlan0: RX AssocResp from 20:4e:7f:30:f9:ae (capab=0x531 status=0 aid=4)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: NZ
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
cfg80211: Regulatory domain changed to country: NZ
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 3000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
wlan0: no IPv6 routers present